Disclaimer

hpeprint.co is non-dependant servicers who help the users in download and installation of Printer software drivers. We can clear your Printer related doubts only as third party. Our motive to present the images and content in this website for purely descriptive purpose. We do not bond with HP and its services nor we do trade products or services. Agree

123.hp.com/setup 139 - HP Bluetooth all-in-one Printer

Home ⁄

HP AMP 139 Bluetooth all-in-one Printer

HP AMP 139 is a compact printer that also has an in-built Bluetooth speaker that blasts out high-quality bass music when you’re not using it to print documents. The HP AMP 139 also has a reasonable print quality. Since the HP AMP 139 printer is wireless, you can use the Web Services if you’ve downloaded the software drivers from 123.hp.com/setup 139 or 123.hp.com/amp139

Print Speed (Black): 7.8 ppm
Paper Input Tray: 60 sheets
Print Speed (colour): 5.5 ppm
Paper Output Tray: 25 sheets
Duty Cycle: 1000 pages per month

Mobile Printing Capacity: ePrint, AirPrint, Mopria, HP Smart App

HP AMP 139 Unboxing

First, tear open the tape on the cardboard flaps and keep the flaps aside.
Then, take out the Setup guides, ink cartridges and power cord that are kept on top. You can use the Setup guide to learn how to download and install the software drivers from 123.hp.com/setup 139 or 123.hp.com/amp139
Next, tilt the printer box and remove the printer from the box.
You’ll see that the printer is shrink-wrapped in a plastic film. Use a knife to make a small tear on the film.

Then, peel away the transparent film on the printer.
Next, open the ink cartridge access area and check for packaging materials.
Close the ink cartridge access area once you’ve taken out unnecessary packaging materials.
Then, open the Paper Input Tray and check if there are any packaging materials there. Lastly, close the Input Tray once you’ve removed the packaging materials.

HP AMP 139 Installing Ink Cartridges

First, plug in one end of the power cord into the printer and the other end into the wall outlet.
Next, press the power button on the printer to switch on the printer.
Then, open the ink cartridge access door.
Unwrap the tri-colour ink cartridge that you kept aside and peel away the orange tabs on the copper-coloured contacts.
Insert the tri-colour cartridge gently into the left slot and make sure that it fits perfectly into place.
Next, remove the wrapper from the black ink cartridge and insert the cartridge into the right slot.

This completes the installation of ink cartridges. If you’ve already installed cartridges and loaded paper into the Paper Tray, you can skip to the section that tells you how to download and install the software drivers from 123.hp.com/setup 139 or 123.hp.com/amp139

HP AMP 139 Loading Plain Paper

First, open the Paper Input Tray and slide the paper-width guides away from each other.
Next, align a stack of sheets on some hard surface and insert the sheets into the Paper Tray.
Then, adjust the paper-width guides such that they slightly touch only the edges of the paper.

Lastly, pull out the Paper Output Tray and Output Tray extender.

In the next step you’ll learn how to connect your HP AMP 139 all-in-one Bluetooth speaker to the internet so that you can download and install the software drivers from 123.hp.com/setup 139 .

HP AMP 139 Wireless Setup

First, switch on the printer and make sure that it is connected to the wireless network.
You must connect your HP AMP 139 printer to the same wireless network as your printer.
Then, press the Wireless button that is on the control panel of your printer.

The printer will now print out an information page.
Follow all the instructions on the page so that you complete the Wireless Setup process.

In the next section, you’ll learn how to download and install the software drivers from 123.hp.com/setup 139

HP AMP 139 Software Driver Installation

Open a browser of your choice and go to 123.hp.com/setup 139
Enter the name and model number of your printer in the search box and press Enter.
Then, click Download and wait for the system to download the software drivers for your HP AMP 139 Printer.
Follow the instructions on the screen.
The printer will now ask how you’d like to connect it to the system.
If you choose the Wireless connection, you’ll have to insert the USB port for a while when the system prompts you to.
When you’ve inserted the cable into the USB slot, the system will ask you to enter the wireless password for the network.
Once you’ve entered the Wireless password, wait until the printer connects to the network.
If the printer is connected to the network, you’ll see that the wireless light stops blinking.
Now, you can disconnect the USB cable from the printer and continue with the installation process.

With this, you’ve completed the download and installation of the software driver from 123.hp.com/setup 139

HP AMP 139 ePrint service

You can send some print jobs from the comfort of your house or from somewhere far away, to your HP AMP 139 Bluetooth printer with ePrint service. Follow the steps below to setup Web Services and ePrint services.

To print out an information sheet, you must press and hold down the power button for three seconds.
Then, press both the Wireless button and printer information buttons at the same time.
You’ll see that the printer starts printing out an information.
Next, enter your printer’s IP address into your browser.

You can find this address in the information sheet.
The Printer Configuration page will open now.
First, click Web Services, Setup and then Continue.
Then, choose the appropriate option in order to agree to all of HP’s terms and conditions.
Then, press the Wireless button that is on the control panel of your printer.
Lastly, follow the instructions on the page and finish the Setup.

You only have to download the software drivers from 123.hp.com/setup 139 or 123.hp.com/amp139 to finish the ePrint service setup process.

HP AMP 139 Bluetooth Setup

This section tells you how to connect your Bluetooth device to your HP AMP 139 Bluetooth printer.

First, press the Bluetooth button on your printer so that it is detectable by your phone.
The printer now emits some noise so that nearby devices can discover it easily.
Next, turn on the Bluetooth on your mobile device.
Tap the name of the printer so that you can connect to it.
If you want to connect another device, first turn off the Bluetooth on your first device.
Then, follow the steps above to connect the second Bluetooth device to your printer.
Next, turn on the Bluetooth in the first device and connect it to your device.

To use this feature, you must download the software drivers from 123.hp.com/setup 139

HP AMP 139 Paper Jam Error

If your HP AMP 139 has a Paper Jam error, you’ll see an E4 message on the display. Follow the steps below to fix the Paper Jam Error.

First, gently take out all the jammed paper from the Paper Input Tray.
If you find other items that jam the Paper Input Tray other than the sheets of paper, remove them from the Input Tray.Then, press the Cancel button so that the printer automatically tries to clear the Paper Jam.
If you can’t clear the Paper Jam in the Input Tray, check the Paper Output Tray for blocks.Next, you must check the ink cartridge access area for any jammed objects or paper.
While the printer is still switched on, open the ink cartridge access area and disconnect the power cord.

Then, slide the ink cartridge slot towards the right and check if there are any objects or papers blocking the ink cartridge.
If you don’t find any objects blocking the ink cartridge access path, close the ink cartridge area.
Check if you’ve downloaded and properly installed the software drivers from 123.hp.com/setup 139 or 123.hp.com/amp139

In case the problem isn’t sorted yet, you can reset your printer. You’ll learn how to reset your printer in the section below.

If your printer still shows a paper jam message, you must get it serviced. Simply click on the Call button and our technicians will tell you how to fix it.

HP AMP 139 Printer Reset

First, switch on the printer and make sure that it is in an active condition.
When, the printer is silent and idle, plug out the power cord from the rear of the printer.
Then, wait for about 10 seconds and plug the power cord back into the printer.
Switch on the printer and try printing your document again.

Disclaimer

We are independent third party service providers who provide guidance and related tips on setting up your printer and downloading & installing software drivers from 123.hp.com/setup 139 . Also, we provide simple fixes for your printer related issues and queries. We are not specifically tied-up with HP and its services in any way nor do we trade any of its products or services. We’ve intended the usage of all the images, logos and content on this website for informational purposes alone. For issues related to service and warranty, contact the manufacturer directly and thoroughly examine our privacy policy.

Disclaimer

hpeprint.co is non-dependant servicers who help the users in download and installation of Printer software drivers. We can clear your Printer related doubts only as third party. Our motive to present the images and content in this website for purely descriptive purpose. We do not bond with HP and its services nor we do trade products or services.

Social Connect