Make your Envy printer setup process busy using this document. Stick on to our HP envy 4512 setup to make the setup process easy. To start the setup process takes the printer out of the box and removes all the packing materials. Save those packing materials since they can be recycled. Based on HP envy 4512 setup, Connect one end of the power cord to the rear end of the printer and connect another end of the power cord to the power outlet. You can set your printer’s preferences on the printer’s control panel. Load Stack of paper into the input tray and install the ink cartridges in their specified slots. Download the printer driver software from the CD that came along with printer or download the software from the HP official website
UnBoxing Printer- HP Envy 4512 Setup
Use our HP envy 4512 setup and take the printer remove out of the box and get rid of all the packing materials and tapes. Gently Lift the scanner lid and remove all the packing materials inside the scanner glass and close the scanner lid. Gently open the ink cartridge access door and get rid of all the packing materials inside the door. Save those packing materials since they can be recycled. After removing the packing materials, close the ink cartridge access door and follow these HP envy 4512 setup.
HP Envy 4512 Power cord connection
Connect one end of the power cord to the rear end of the printer and connect another end to the power source or power outlet. Switch on your printer, you can set your time& date and country preferences from your printer’s control panel .After the setting up process, a welcome screen will get displayed in the printer’s control panel.
HP Envy 4512 Ink Cartridge installation
Make use of the ink cartridge that came along with your printer, since it yields high-quality printing. Your HP printer usually comes with black and tri-color ink cartridges. Start the process by opening the ink cartridge access door and with HP envy 4512 setup. Make sure that the ink cartridges carriage is at laze and quite before starting the installation process. Gently take the ink cartridge out of its package, carefully remove the black plastic of the ink cartridge. Don’t touch copper-colored contacts or the ink nozzles of the ink cartridge, don’t replace or touch the protective tape of the contacts, since handling these parts may result in ink clogs, ink failure and other bad electrical connections.
Slide the ink cartridge into the empty slot in an upward angle and gently push it in the place until it snaps into the place. Place tri-color ink cartridge on the left side and place black ink cartridge on the right side. Based on the HP envy 4512 setup,after installing the ink cartridges make sure that you have closed ink cartridge access door.
HP Envy 4512 Loading Paper into the input tray
Get rid of all the packing materials and tape inside the input and photo tray. Load plain A4 or U.S size paper into the input tray. After pulling the paper tray out, push in the photo tray. Get rid of all the packing materials inside the input tray. Slide the paper guide as far as possible. Place the paper in portrait orientation where the print side should be facing downward, then push the stack into the tray until it get stops. Move the paper guide until it touch the edge of the paper stack, never push it so tight since it may bind against the paper. Replace the output tray of your paper tray, push the input tray until it gets locks into the place. The printer will instantly starts the initialization process, the printer may make some noises during this initialization process. After the initialization process, printer will print calibration page. You can recycle all those packing materials.
HP Envy 4512 Printer Software Installation
You can easily get the printer software from the CD that came along with your printer or you can download the printer driver software from the HP official website support.hp.com. Connect your printer to the computer after getting notified by the printer software.